Buick Encore Speaker Size
Speaker size, type, and location chart for Buick Encore models from 2013 to 2018 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
A-Pillar Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2013 - 2018 | Tweeter | 1 |
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2013 - 2018 | Midbass / Full-Range | 6.75 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2013 - 2018 | Midbass / Full-Range | 6.75 |
Cargo Area Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2013 - 2018 | Midbass / Full-Range | 5.25 |
Buick Encore Speaker FAQ
What speakers should I upgrade first in my Buick Encore for the biggest sound improvement?
Start with the front door panel speakers. The 6.75 inch coaxials handle most of your music's mid-range frequencies and vocals. You'll notice the difference immediately since these sit closest to your ears. Component speakers work better here - around 50-75 watts RMS should be plenty. The factory tweeters in the A-pillar might need replacing too if you go component, but the front doors are your priority. Rear speakers can wait unless you carry passengers regularly.
Can I install component speakers in all locations of my Buick Encore?
The front and rear door panels accept both coaxial and component types, so yes for those locations. Component systems typically sound cleaner since they separate frequencies better. Your Encore already has 1 inch tweeters mounted in the A-pillars, which makes front component installation easier. The cargo area 5.25 inch spot could take components too, though most people use coaxials there. Just verify crossover mounting space before buying - some component sets have bulky crossovers that might not fit behind door panels.
What's the difference between using coaxial vs component speakers in a Buick Encore?
Coaxials combine the tweeter and woofer in one unit. Simpler installation, decent sound. Components split them apart - separate tweeters, woofers, and crossovers. Better sound separation and imaging, but more complex wiring. In your Encore, components make sense for front doors since you already have A-pillar tweeter locations. Rear doors... coaxials probably fine unless you're really particular about rear passenger sound. The cargo area definitely gets coaxials - no point in components back there.
Should I replace the 1 inch tweeters in my Buick Encore's A-pillars?
Depends on your front door speaker choice. If you install coaxial speakers, keep the factory A-pillar tweeters - they'll handle upper frequencies while your coaxials focus on mids and bass. If you go with component speakers for the front doors, you might want to replace the A-pillar tweeters with ones that match your new component set. The crossover frequencies need to work together properly. Some people just disconnect the factory tweeters when adding components, but that wastes good mounting locations.
What power handling should I look for in Buick Encore replacement speakers?
Most aftermarket head units push 15-22 watts RMS per channel. If you're keeping the factory stereo, look for speakers that handle 25-50 watts RMS - gives you headroom without needing an amplifier. The 6.75 inch doors can handle more power than the 5.25 inch cargo speakers obviously. Efficiency matters more than power handling anyway. Speakers with 88+ dB sensitivity will sound louder with your factory power. Peak wattage numbers don't mean much - focus on RMS ratings.