Chevrolet Beretta Speaker Size
Speaker size, type, and location chart for Chevrolet Beretta models from 1988 to 1996 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Kick Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1991 - 1996 | Full-Range | 4x6 |
Rear Deck Lid Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1988 - 1996 | Full-Range | 6x9 |
Dashboard Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1988 - 1990 | Midrange | 4 |
Chevrolet Beretta Speaker FAQ
Which speakers should I replace first in my Chevrolet Beretta for the biggest sound improvement?
Start with the 6 x 9 inch rear deck speakers. These handle most of your mid-bass and volume output - around 50-100 watts RMS typically. The rear deck location gives you the most acoustic space to work with. Front speakers matter for imaging but the 6 x 9s do the heavy lifting. Dashboard 4 inch speakers from 1988-1990 models are basically just for fill anyway. You'll notice the difference immediately with quality 6 x 9 coaxials rated around 4 ohms.
Can I install component speakers in my Chevrolet Beretta's front locations?
The 4 x 6 inch front kick panels from 1991-1996 might work with components, but it's tricky. You'd need to mount tweeters separately - maybe in the dashboard area. Earlier models with 4 inch dashboard speakers... that's going to be tough. The depth behind dashboard locations is usually limited. Coaxial speakers are probably your best bet for front channels. Component systems need more planning and custom work in the Beretta. Stick with good coaxials rated 20-75 watts RMS unless you're doing a full custom install.
What's the difference between coaxial and triaxial speakers for my Chevrolet Beretta's rear deck?
Coaxial has tweeter and woofer. Triaxial adds a mid-range driver - so three elements total. The 6 x 9 rear deck can handle either type. Triaxial might give you better mid-range clarity around 1-4 kHz frequencies. But honestly? Good coaxials often sound better than cheap triaxials. The extra driver in triaxial can create phase issues if not designed properly. Focus on power handling - look for speakers that can take 40-80 watts RMS. The Beretta's rear deck position benefits more from clean power than extra drivers.
Why did Chevrolet change from 4 inch dashboard to 4 x 6 kick panel speakers in the Beretta?
Better sound staging and power handling. Dashboard 4 inch speakers fire upward - not ideal for listening position. The kick panel 4 x 6 speakers from 1991 onward aim more directly at passengers. Plus 4 x 6 gives you more cone area for mid-bass response. Frequency response probably improved in the 80-200 Hz range. Dashboard mounting also limits speaker depth - maybe 2 inches total. Kick panels typically allow deeper speakers with larger magnets. The change suggests Chevrolet wanted better front-stage imaging in later Beretta models.