Chevrolet Tracker Speaker Size

Rear Side Panel Speaker

A-Pillar Speaker

Front Door Panel Speaker

Rear Door Panel Speaker

Cargo Area Speaker

Dashboard Speaker

Chevrolet Tracker Speaker FAQ

What size speakers fit the front door panels of the Chevrolet Tracker?

The Chevrolet Tracker front door panels take 6.5 inch midbass or full-range speakers. This location is arguably the most important one to upgrade first. Factory units in this position tend to handle a wide frequency range, roughly 80 Hz to 5,000 Hz in most configurations, but they do it poorly. A quality 6.5 inch replacement with a sensitivity rating around 88 dB or higher will likely make the most noticeable difference in overall sound clarity. Verify fit by checking the mounting depth before purchasing, since shallow cavities in the Chevrolet Tracker door panel can be a real problem with certain aftermarket frames.

Do the rear door panels in the Chevrolet Tracker use the same speaker size as the front doors?

Yes, the Chevrolet Tracker rear door panels also use 6.5 inch midbass or full-range speakers. Same size, but the acoustic role is somewhat different. Rear speakers generally fill in the soundstage rather than lead it. Matching the rear units to your front door speakers in terms of impedance, ideally 4 ohms, helps prevent load imbalances at the head unit or amplifier. Power handling around 50 to 80 watts RMS should be more than sufficient here.

What speakers are installed in the rear side panels of the Chevrolet Tracker?

The Chevrolet Tracker rear side panel location uses either 5.25 inch or 6.5 inch midbass or full-range speakers depending on the configuration. The smaller 5.25 inch units are found in certain builds, while others use the larger 6.5 inch format. These positions tend to supplement lower midrange frequencies, somewhere in the 100 Hz to 3,000 Hz range, though exact crossover points vary. Getting the size wrong here is an easy mistake. Measure the existing cutout or pull the factory speaker to confirm before ordering replacements for your Chevrolet Tracker.

What type of speaker goes in the A-pillar of the Chevrolet Tracker?

The Chevrolet Tracker A-pillar location uses a 1 inch tweeter. Small size, big impact on perceived sound quality. Tweeters at this position handle high frequencies, typically above 3,500 Hz to 5,000 Hz, and the forward-facing angle in the A-pillar tends to improve stereo imaging noticeably compared to door-mounted tweeters. When replacing this unit, look for a silk dome or textile dome design rather than metal dome if you find the factory sound harsh. A crossover point around 3,500 Hz at 12 dB per octave slope is generally considered a safe starting point.