Chrysler Sebring Speaker Size

Speaker size, type, and location chart for Chrysler Sebring models from 1995 to 2010 production years.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Front Door Panel Speaker

YearsTypeSize (inch)
1996 - 2010Full-Range6x9
2000 - 2004Midbass / Full-Range6.75
2001 - 2004Midbass / Full-Range6.5
2001 - 2002Tweeter1
1995 - 2000Midbass / Full-Range5.25

Dashboard Speaker

YearsTypeSize (inch)
2007 - 2010Midrange2.5
1996 - 2006Full-Range3.5

Rear Deck Lid Speaker

YearsTypeSize (inch)
1995 - 2010Full-Range6x9
2001Midbass / Full-Range6.5

Rear Speaker

YearsTypeSize (inch)
2001 - 2006Full-Range6x9

Rear Side Panel Speaker

YearsTypeSize (inch)
2000Full-Range6x9

Rear Door Panel Speaker

YearsTypeSize (inch)
1996 - 1999Full-Range6x9

Chrysler Sebring Speaker FAQ

Which speakers should I replace first in my Chrysler Sebring for the biggest sound improvement?

Start with the 6 x 9 inch rear deck speakers. These handle most of your bass and midrange frequencies - replacing them typically gives you 60-70% of the total sound improvement. The rear deck 6 x 9s can handle 50-100 watts RMS and work at 4-ohm impedance. Your Chrysler Sebring's rear deck location provides good acoustic coupling with the cabin space. Front door speakers come second priority, though the size varies depending on your specific setup. Dashboard speakers last since they mainly handle high frequencies that factory units often reproduce adequately.

What's the difference between coaxial and component speakers for my Chrysler Sebring?

Coaxial speakers put the tweeter and woofer in one unit - easier installation, single wire connection. Component speakers separate the tweeter from the woofer with an external crossover. Components typically sound better because each driver optimizes for specific frequencies. Your Sebring's front door panels can accommodate both types. Coaxials work fine for rear positions since you're not doing critical listening from back there. Components cost more and require mounting the tweeter separately, often in the dashboard or door panel. The crossover network usually handles 12dB/octave slopes around 3000-4000 Hz.

Why does my Chrysler Sebring have different front door speaker sizes across different configurations?

Factory cost cutting and trim level differences. The 6 x 9 inch front doors typically came in base models or certain trim packages. The 6.75 inch and 6.5 inch configurations appeared in mid-level trims with different door panel designs. Some Sebring models used separate 1 inch tweeters paired with smaller woofers for component setups. The 5.25 inch front speakers usually appeared in earlier base models with simpler audio packages. Each size requires different mounting depths and hole cutouts. You'll need to measure your actual door panel opening before ordering replacements.

Can I upgrade the dashboard speakers in my Chrysler Sebring to improve sound quality?

Dashboard speakers mostly handle high frequencies above 4000 Hz, so upgrading them provides subtle improvement. The 3.5 inch dashboard speakers can be replaced with higher-quality full-range units rated around 20-40 watts RMS. The 2.5 inch tweeters benefit from silk dome or aluminum cone upgrades. However... your money goes further upgrading the door and rear deck speakers first. Dashboard location creates reflection issues off the windshield anyway. If you're running component speakers in the doors, you might bypass the dashboard speakers entirely and mount new tweeters elsewhere.