Honda Crosstour Rear Door Panel Speaker Size
The Honda Crosstour rear door panel accommodates a 6.5 inch speaker size across all listed model years. Compatible speaker types for the audio system include midbass and full-range replacement units. These specifications cover a range of years from 2012 to 2015.
| Year | Type | Size (inch) |
|---|---|---|
| 2015 | Midbass / Full-Range | 6.5 |
| 2014 | Midbass / Full-Range | 6.5 |
| 2013 | Midbass / Full-Range | 6.5 |
| 2012 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The rear door panel location in the Honda Crosstour positions speakers within the lower portion of the cabin doors, mounting drivers at roughly seat-level height along the vehicle's side walls.
- Door panel installations typically involve a recessed mounting cavity with a defined depth clearance, meaning the mounting depth of any replacement driver must be compatible with the space available behind the door panel surface.
- A 6.5-inch driver refers to the nominal cone diameter, which determines the mounting cutout diameter and the bolt pattern spacing required for a secure fit within the rear door panel opening.
- 6.5-inch drivers are capable of moving a relatively large volume of air compared to smaller cone sizes, which supports reproduction of lower frequencies at the rear door panel location.
- In a rear door panel context, a 6.5-inch driver placed at seat level contributes low-to-mid frequency energy to the listening area, partially compensating for the distance between the rear doors and the front listening position.
- The midbass driver type is designed to handle frequencies roughly between 80 Hz and 500 Hz, focusing on the lower midrange and upper bass regions rather than the full audible spectrum.
- At the Honda Crosstour rear door panel location, a midbass driver type works within the natural acoustic reinforcement provided by door panel cavities, which tend to load the rear of the cone and influence bass output.
- The full-range driver type reproduces frequencies across a broader portion of the audible spectrum, typically from below 100 Hz up to several kilohertz, handling both bass and midrange content from a single driver.
- A full-range driver installed in the rear door panel of the Honda Crosstour handles mid and upper frequencies that contribute to spatial warmth and ambient sound reproduction within the rear cabin area.
- Door panel speakers are generally mounted in an off-axis position relative to seated occupants, which affects high-frequency directionality more than low-frequency reproduction, a factor that favors wider dispersion characteristics in any driver used at the rear door position.
- The rear door panel mounting surface on vehicles in the Honda Crosstour class typically requires a speaker grille or retention ring, and the 6.5-inch nominal size corresponds to standardized grille and trim ring dimensions available for replacement fitments.