Honda Fit Rear Door Panel Speaker Size
The Honda Fit rear door panel accommodates a 6.5 inch speaker size, with all listed model years supporting the same 6.5 inch units. Compatible speaker types for the rear door panel location include midbass and full-range. These specifications cover the 2007 to 2018 model range.
| Year | Type | Size (inch) |
|---|---|---|
| 2018 | Midbass / Full-Range | 6.5 |
| 2017 | Midbass / Full-Range | 6.5 |
| 2016 | Midbass / Full-Range | 6.5 |
| 2015 | Midbass / Full-Range | 6.5 |
| 2014 | Midbass / Full-Range | 6.5 |
| 2013 | Midbass / Full-Range | 6.5 |
| 2012 | Midbass / Full-Range | 6.5 |
| 2011 | Midbass / Full-Range | 6.5 |
| 2010 | Midbass / Full-Range | 6.5 |
| 2009 | Midbass / Full-Range | 6.5 |
| 2008 | Midbass / Full-Range | 6.5 |
| 2007 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The Honda Fit rear door panel speaker location accommodates a 6.5 inch driver across all listed model years from 2007 through 2018.
- Rear door panel mounting positions the speaker within the lower portion of the door card, typically orienting the cone toward the cabin floor or lower seating area rather than directly at ear level.
- A 6.5 inch cone diameter produces a relatively large radiating surface area, which is mechanically suited to moving the air volume needed to reproduce lower-frequency content with meaningful output.
- The rear door panel enclosure is semi-sealed by the door cavity itself, and the interior sheet metal behind the door card functions as a partial acoustic boundary that interacts with rear-firing low-frequency energy from a 6.5 inch driver.
- At 6.5 inches, the cone mass and surround compliance are generally sufficient to extend frequency response into the upper bass and lower midrange, covering roughly 60 Hz to 5 kHz depending on the specific driver's design.
- Midbass is one of the 2 compatible types listed for the Honda Fit rear door panel location; a midbass driver in a door panel handles the frequency band spanning roughly 80 Hz to 500 Hz, reinforcing the lower-mid foundation of the soundstage from the rear of the cabin.
- Full-range is the other compatible type listed for the rear door panel location; a full-range driver is designed to reproduce a wide span of audible frequencies from a single cone, reducing the need for crossover components at this position.
- Because the rear door panel sits behind and to the sides of the primary listening position, a full-range driver installed there contributes ambient and spatial information across the cabin rather than focused point-source imaging.
- A midbass driver at the rear door panel location operates most effectively when crossed over with dedicated tweeters elsewhere in the vehicle, since a 6.5 inch cone loses high-frequency directional control as wavelengths shorten relative to the cone diameter.
- The door panel mounting surface constrains the mounting depth available to any 6.5 inch driver, and the internal door geometry limits the volume of air behind the cone, which affects the low-frequency resonance behavior of a driver installed at this location.