Hyundai Veloster Front Door Panel Speaker Size
The Hyundai Veloster front door panel accommodates a 1 inch speaker size and 6.5 inch speakers. Compatible audio types across both sizes include tweeters and midbass or full-range units. These specifications cover the 2012 to 2017 model years.
| Year | Type | Size (inch) |
|---|---|---|
| 2017 | Tweeter | 1 |
| 2017 | Midbass / Full-Range | 6.5 |
| 2016 | Tweeter | 1 |
| 2016 | Midbass / Full-Range | 6.5 |
| 2015 | Tweeter | 1 |
| 2015 | Midbass / Full-Range | 6.5 |
| 2014 | Tweeter | 1 |
| 2014 | Midbass / Full-Range | 6.5 |
| 2013 | Tweeter | 1 |
| 2013 | Midbass / Full-Range | 6.5 |
| 2012 | Tweeter | 1 |
| 2012 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Tweeter | A small driver built for high frequencies, typically from about 2,000 Hz to 20,000 Hz. It adds treble detail and clarity and is usually mounted near ear level or aimed at the listener. |
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The Hyundai Veloster front door panel accommodates 2 distinct speaker sizes simultaneously, with both a 1 inch and a 6.5 inch position present within the same door enclosure across all listed model years.
- Front door panel locations are typically integrated into the door's interior trim structure, placing speakers within a cavity that uses the door's internal volume as an acoustic chamber and positions drivers at roughly seat-level height relative to the occupant.
- The 6.5 inch position in the Hyundai Veloster front door panel is sized to support midbass or full-range driver types, a diameter associated with the reproduction of frequencies roughly between 60 Hz and 5 kHz depending on cone material and crossover configuration.
- A 6.5 inch midbass driver at the front door location benefits from the door cavity's volume, which can reinforce low-midrange and upper bass output by functioning as a partial acoustic enclosure behind the cone.
- When a 6.5 inch driver is operated in full-range mode at the front door position, the physical proximity of the driver to the lower portion of the listening position affects the spatial imaging and tonal balance perceived by front occupants.
- The midbass designation for the 6.5 inch position indicates a driver optimized for the frequency band between bass fundamentals and the upper midrange, typically used in conjunction with a separate high-frequency driver rather than alone.
- The 1 inch position in the front door panel of the Veloster is rated exclusively for tweeter types, a size associated with high-frequency reproduction generally spanning from approximately 2 kHz upward.
- A 1 inch tweeter dome or cone is physically small enough to radiate high frequencies with relatively wide dispersion at the lower end of its range, though directionality increases at higher frequencies due to wavelength-to-driver-size relationships.
- Mounting a 1 inch tweeter within the front door panel positions the high-frequency driver closer to the listening axis of the front occupant compared to A-pillar or dash locations, influencing the perceived stereo staging and treble directionality.
- The pairing of a 1 inch tweeter and a 6.5 inch midbass or full-range driver within the same front door panel represents a 2-way spatial arrangement where frequency division between the 2 drivers is determined by crossover components either passive or active.
- Door panel speaker locations are subject to road noise, door glass vibration, and panel resonance, all of which can interact with the acoustic output of both the 1 inch and 6.5 inch drivers mounted within the Hyundai Veloster front door.
- The consistency of the 1 inch and 6.5 inch specifications across the 2012 through 2017 model years indicates a uniform front door panel cavity and mounting geometry throughout the listed production range of the Veloster.