Land Rover Discovery Sport Front Door Panel Speaker Size
The Land Rover Discovery Sport front door panel accommodates a 6.5 inch speaker size across all listed model years. Compatible types for the location include midbass and full-range audio system units. These specifications cover the 2015 to 2017 model range.
| Year | Type | Size (inch) |
|---|---|---|
| 2017 | Midbass / Full-Range | 6.5 |
| 2016 | Midbass / Full-Range | 6.5 |
| 2015 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The front door panel location in the Land Rover Discovery Sport positions speakers within the lower portion of the door cavity, where the enclosure formed by the door shell and panel influences low-frequency reinforcement and mid-frequency projection toward the cabin.
- A 6.5 inch driver in a front door panel installation occupies a mid-size cone area that supports meaningful low-midrange reproduction, with the door cavity acting as a partial acoustic enclosure that assists bass extension in the 60-250 Hz region.
- The front door placement directs sound laterally across the cabin floor level, meaning a 6.5 inch driver at that position covers a wide horizontal dispersion pattern that reaches both front and rear seating areas for lower frequencies.
- Midbass drivers, as a compatible type for the Land Rover Discovery Sport front door panel, are optimized for the 80-500 Hz frequency band, where kick drum fundamentals, bass guitar, and lower male vocal registers reside, and the door cavity reinforces the enclosure effect that midbass operation depends on.
- Full-range drivers, also listed as a compatible type for the front door panel position, are designed to reproduce a wider spectrum from approximately 60 Hz to 20 kHz within a single cone and voice coil assembly, making them functional across bass, midrange, and partial treble content without a dedicated crossover network.
- The front door panel mounting location typically uses a flat or shallow-depth baffle integrated into the door trim, which constrains the available mounting depth and influences the choice between driver types with differing magnet and basket geometries.
- A 6.5 inch cone diameter in a door panel position provides sufficient radiating surface area to move air volume adequate for midbass output levels in an automotive cabin environment without requiring a separate subwoofer for fundamental bass presence in that frequency range.
- The front door panel location places the driver at approximately seat-level height, which affects the direct sound path to the listener's ears and contributes to the perceived stereo imaging width across the front soundstage.
- Full-range compatibility in the front door panel of the Discovery Sport indicates a mounting configuration that accommodates a driver capable of operating without a high-pass crossover filter, as the door enclosure and cone size together manage excursion limits across the frequency range.
- Midbass drivers in a front door application are crossed over at the upper end of their range, typically around 500 Hz, with higher frequencies handled by a separate tweeter mounted elsewhere in the cabin, such as the A-pillar or mirror housing.