Lexus NX200t Speaker Size
Speaker size, type, and location chart for Lexus NX200t models from 2015 to 2015 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2015 | Midbass / Full-Range | 6.5 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2015 | Midbass / Full-Range | 6.5 |
Lexus NX200t Speaker FAQ
What speaker types work best for upgrading Lexus NX200t door panels?
Component speakers typically deliver better sound separation than coaxial options. Your NX200t uses 6.5 inch speakers in both front and rear doors, which gives you flexibility. Front doors should probably get components if you're serious about audio quality - the tweeter placement makes a difference. Rear doors can handle coaxials since they're mainly for fill. Look for speakers rated around 50-75 watts RMS to match your factory power output.
Should I replace front or rear speakers first in my Lexus NX200t?
Start with the front door panels. That's where most of your stereo imaging happens anyway. The 6.5 inch front speakers in the NX200t handle midrange and vocal frequencies that you actually notice while driving. Rear speakers mostly add ambiance - nice to have but not critical. Component speakers up front will give you the biggest improvement for your money. You might find the rear factory speakers sound fine once the fronts are upgraded.
Can I mix coaxial and component speakers in my Lexus NX200t setup?
Absolutely works fine. Many people run components in front doors and coaxials in rear. The 6.5 inch size is consistent throughout your NX200t, so installation depth shouldn't vary much between locations. Just make sure impedance matches - usually 4 ohms for both types. The crossover networks might need adjustment if you're using an aftermarket amp, but factory head units generally handle mixed configurations without issues.
What power handling should I look for in 6.5 inch Lexus NX200t replacement speakers?
Factory amplification in the NX200t probably pushes around 15-20 watts RMS per channel. Speaker specs should handle 40-80 watts RMS to give you headroom for future amp upgrades. Don't get caught up in peak power ratings - they're mostly meaningless. Sensitivity matters more anyway. Look for 87-90 dB sensitivity ratings so your speakers sound good even with factory power levels.
Do full-range speakers work better than component systems for Lexus NX200t rear doors?
Full-range speakers can work, but they're kind of a compromise solution. Your rear door panels in the NX200t are sized for 6.5 inch speakers, which limits full-range frequency response compared to dedicated components. Coaxials might be the sweet spot - they fit the factory mounting points and give you separate tweeter response without complex crossover installation. Full-range speakers tend to sound muddy in the 2-5 kHz range where vocals live.