The Mazda MPV rear location accommodates a 6x9 inch speaker size, supporting 6x9 inch units across all listed model years. Full-range types are compatible with the audio system in the rear position. The specifications cover the years 2000 to 2002.
A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems.
Additional Notes
The rear speaker location in the Mazda MPV accommodates 6x9 inch drivers across the 2000, 2001, and 2002 model years.
A 6x9 inch speaker footprint requires a mounting cavity with sufficient depth and baffle area to seat the larger oval frame, which is physically distinct from round speaker cutouts and typically demands precise fitment to avoid rattling or air gaps.
The 6x9 inch oval format produces a larger cone surface area than most round midrange alternatives, which increases low-frequency displacement and allows the rear position to reproduce bass and lower midrange content with greater efficiency.
The rear placement of the 6x9 inch drivers in the Mazda MPV positions the speakers away from the primary listening zone, a layout that favors wider dispersion to project sound toward front-seated passengers.
Full-range is the only compatible speaker type listed for the rear location, meaning each driver is expected to reproduce the entire audible frequency spectrum - from low bass through high-frequency treble - within a single unit.
A full-range driver in the rear of a multi-passenger vehicle like the MPV carries the acoustic load of serving both rear and, to a degree, front cabin zones, since no dedicated tweeter or subwoofer is specified for the same location.
The 6x9 inch form factor is structurally suited to full-range operation because the larger cone area supports low-frequency reproduction while the dust cap and cone geometry can extend response into higher frequencies, reducing the need for supplemental drivers.
Rear speaker positions in vehicles are commonly mounted in side panels, rear quarter panels, or floor-level enclosures, each of which affects bass loading and high-frequency projection angle relative to seated occupants.