Mercedes-Benz CL63 AMG Speaker Size
Speaker size, type, and location chart for Mercedes-Benz CL63 AMG models from 2008 to 2014 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2008 - 2014 | Midbass / Full-Range | 6.5 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2008 - 2014 | Midrange | 4 |
Mercedes-Benz CL63 AMG Speaker FAQ
Should I replace the 4 inch rear door speakers or 6.5 inch front door speakers first in my Mercedes-Benz CL63 AMG?
Replace the 6.5 inch front door speakers first. These handle most of your music's frequency range and sit closer to your ears. The front component system in the CL63 AMG likely crosses over around 2-3kHz, meaning those 6.5s reproduce everything below that point. Rear 4 inch coaxials mainly fill in ambient sound. You'll notice maybe 70% of the improvement just from upgrading the fronts. The power difference matters too - front speakers typically get 50-75 watts RMS while rears might only see 25-40 watts from the factory amp.
What's the difference between the coaxial and component speakers in my Mercedes-Benz CL63 AMG?
Your front 6.5 inch speakers are part of a component system - separate woofer and tweeter with an external crossover. The rear 4 inch are coaxial full-range drivers with the tweeter mounted directly on the woofer cone. Component systems generally sound clearer because you can position tweeters optimally and use better crossover slopes. But here's the thing - some aftermarket coaxials actually outperform cheap component sets. The CL63 AMG's factory components might use basic crossovers around 12dB/octave. Quality coaxials with silk dome tweeters could sound more natural than harsh metal dome components.
Can I install 6x9 speakers instead of the 4 inch rear speakers in my Mercedes-Benz CL63 AMG?
Probably not without major modifications. The rear door panels are designed specifically for 4 inch mounting depths and cutout dimensions. Even if you could physically fit 6x9s, you'd likely need custom mounting brackets and door panel modifications. The impedance should stay around 4 ohms to match your factory amplifier output. Plus 6x9s in rear doors often create weird imaging - bass frequencies become directional when they shouldn't be. Better to upgrade those 4 inch positions with high-quality speakers designed for that size. Think silk dome tweeters, butyl rubber surrounds, maybe 88-90dB sensitivity.
Why does my Mercedes-Benz CL63 AMG have different speaker configurations front and rear?
It's about frequency distribution and staging. The front component setup handles critical midrange imaging - vocals, guitars, piano fundamentals typically between 200Hz and 3kHz. Your 6.5 inch front drivers probably cross to the tweeters around 2.5-3kHz. Rear 4 inch full-range speakers fill the cabin with ambient reflections and upper bass reinforcement. They're not meant for primary listening. The CL63 AMG's acoustics benefit from this arrangement because component separation up front creates better stereo width. Coaxial rears keep things simple while adding that enveloping sound luxury cars need.