Mercedes-Benz S600 Speaker Size
Speaker size, type, and location chart for Mercedes-Benz S600 models from 1994 to 2017 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2006 - 2017 | Midbass / Full-Range | 6.5 |
| 1998 - 2007 | Midbass / Full-Range | 5.25 |
| 2001 - 2005 | Tweeter | 1 |
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1998 - 2017 | Midbass / Full-Range | 6.5 |
| 2001 - 2005 | Tweeter | 1 |
Rear Deck Center Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2001 - 2005 | Subwoofer | 8 |
Dashboard Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1994 - 1997 | Full-Range | 5.25 |
Rear Deck Lid Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1994 - 1997 | Midbass / Full-Range | 6.5 |
Mercedes-Benz S600 Speaker FAQ
What speakers should I replace first in my Mercedes-Benz S600?
Replace the front door panel speakers first. These 6.5 inch units handle most of your audio experience and provide the biggest improvement per dollar spent. The front speakers typically run at 4-ohm impedance and can handle 50-75 watts RMS effectively. Component speakers work best here - they separate tweeter and woofer duties for cleaner frequency response. Coaxial speakers might be easier to install though. You'll notice better vocal clarity and instrument separation immediately after upgrading the fronts.
Can I install component speakers in Mercedes-Benz S600 door panels without modifications?
Most likely yes, but it depends on your existing setup. The door panels typically accommodate 6.5 inch component systems with separate crossovers. Mount the tweeter in the existing 1 inch location if your S600 has dedicated tweeter spots. Otherwise, you might need to create a tweeter mount or use the door's existing tweeter housing. The crossover usually fits behind the door panel. Check your wiring - some Mercedes systems use proprietary connectors that need adapters. Component speakers generally offer better soundstage than coaxials, especially in luxury vehicles with good acoustics.
Why does my Mercedes-Benz S600 have different speaker sizes in different locations?
Speaker size relates to frequency response and available space. The 6.5 inch front and rear door speakers handle mid-bass frequencies around 60-3000 Hz effectively. Smaller 5.25 inch speakers in dashboard or rear locations focus on midrange clarity - they can't reproduce deep bass but excel at vocals. The 1 inch tweeters extend high-frequency response up to 20,000 Hz for crisp details. Some S600 models include 8 inch rear deck speakers for additional bass reinforcement. This configuration creates a balanced frequency spectrum across the cabin... though factory power distribution might limit each speaker's potential.
Should I upgrade the rear deck speakers in my Mercedes-Benz S600?
Rear deck speakers often provide bass support rather than primary listening. The 6.5 inch rear deck units can improve overall fullness, but they're lower priority than door speakers. If your S600 has the 8 inch rear deck center speaker, that's essentially a subwoofer and worth upgrading for better low-end response. Look for speakers rated around 100-150 watts peak power handling. The rear deck location can create some cabin resonance issues though. Consider dampening materials if you notice excessive vibration after installation.
What's the difference between coaxial and component speakers for Mercedes-Benz S600?
Component speakers separate the tweeter and woofer into different drivers with an external crossover network. This typically produces better imaging and frequency separation since each driver optimizes for its frequency range. Coaxial speakers mount the tweeter directly on the woofer cone - simpler installation but potentially less precise sound reproduction. In the S600's acoustically-treated cabin, components usually justify the extra complexity. The crossover networks can handle 12 dB/octave slopes around 3000-4000 Hz crossover points. Installation time increases significantly with components though.