Mitsubishi Lancer A-Pillar Speaker Size
The Mitsubishi Lancer A-Pillar accommodates a 1 inch speaker size. Tweeter units are the compatible speaker type for the location. The specifications cover 2002 to 2015.
| Year | Type | Size (inch) |
|---|---|---|
| 2015 | Tweeter | 1 |
| 2008 | Tweeter | 1 |
| 2007 | Tweeter | 1 |
| 2006 | Tweeter | 1 |
| 2005 | Tweeter | 1 |
| 2004 | Tweeter | 1 |
| 2003 | Tweeter | 1 |
| 2002 | Tweeter | 1 |
Speaker Types
| Type | Description |
|---|---|
| Tweeter | A small driver built for high frequencies, typically from about 2,000 Hz to 20,000 Hz. It adds treble detail and clarity and is usually mounted near ear level or aimed at the listener. |
Additional Notes
- The A-pillar location in the Mitsubishi Lancer positions speakers at the forward corners of the cabin, mounted within the triangular trim panel where the windshield meets the front door frame on each side.
- A-pillar placement situates speakers at roughly ear height for front-seat occupants, which is a acoustically favorable position for high-frequency sound delivery due to the reduced distance and angle between the driver and the source.
- The 1 inch diameter specified across all Mitsubishi Lancer A-pillar positions reflects the tight spatial constraints of A-pillar trim panels, which have limited depth and surface area compared to door or dash locations.
- A 1 inch driver requires a shallow mounting depth, making it mechanically suited to the thin profile of A-pillar housings where larger drivers would not fit without significant modification.
- The tweeter type is the only compatible speaker type listed for the Mitsubishi Lancer A-pillar, consistent with the physical limitations of that mounting location.
- Tweeters operate in the high-frequency range, typically from around 2,000 Hz up to 20,000 Hz, reproducing sounds such as vocal presence, string overtones, and cymbal detail that require fast, small-cone movement.
- A 1 inch tweeter, by virtue of its small diaphragm surface area, is capable of reproducing high frequencies with relatively controlled directional dispersion, which at A-pillar height projects sound toward the listening position rather than reflecting off surfaces.
- The A-pillar location inherently separates the tweeter from the mid-range and woofer drivers typically installed in the doors or rear deck, which establishes a spatial division of the frequency spectrum across the cabin.
- Because the A-pillar sits forward in the vehicle, 1 inch tweeters mounted there contribute to a front-stage soundstage, where high-frequency content originates from ahead of the listener rather than from the sides or rear.
- The consistent 1 inch tweeter specification across the listed Mitsubishi Lancer model years indicates a stable A-pillar cavity dimension throughout the corresponding production period.