Nissan 200SX Rear Deck Lid Speaker Size
The Nissan 200SX rear deck lid accommodates a 6.5 inch speaker size across all listed model years. Compatible audio types for the location include midbass and full-range units. The specifications cover a range of years from 1980 to 1998.
| Year | Type | Size (inch) |
|---|---|---|
| 1998 | Midbass / Full-Range | 6.5 |
| 1997 | Midbass / Full-Range | 6.5 |
| 1996 | Midbass / Full-Range | 6.5 |
| 1995 | Midbass / Full-Range | 6.5 |
| 1988 | Midbass / Full-Range | 6.5 |
| 1987 | Midbass / Full-Range | 6.5 |
| 1986 | Midbass / Full-Range | 6.5 |
| 1985 | Midbass / Full-Range | 6.5 |
| 1984 | Midbass / Full-Range | 6.5 |
| 1983 | Midbass / Full-Range | 6.5 |
| 1982 | Midbass / Full-Range | 6.5 |
| 1981 | Midbass / Full-Range | 6.5 |
| 1980 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The rear deck lid is a horizontal mounting surface positioned at the rear of the cabin, typically spanning the width of the vehicle between the rear seats and the back glass.
- Deck lid locations generally place speakers face-up or at a shallow upward angle, which affects the dispersion pattern toward the cabin ceiling and rear passenger area rather than directly toward listeners.
- The Nissan 200SX rear deck lid accepts a 6.5 inch speaker diameter across all listed model years, meaning the mounting cutout and baffle dimensions remain consistent at that size throughout the specified range.
- A 6.5 inch driver occupies a mid-sized cone area that supports meaningful low-midrange output while still maintaining enough upper-midrange extension to function without a dedicated tweeter in a full-range configuration.
- The physical depth clearance beneath the deck lid panel is a relevant factor for 6.5 inch drivers, as woofer cone excursion and magnet assembly depth vary considerably between midbass and full-range designs at that diameter.
- Midbass speakers are designed to handle the lower portion of the midrange and upper bass frequencies, roughly from around 80 Hz to 500 Hz, prioritizing cone area and excursion over high-frequency reproduction.
- In a rear deck lid position, a midbass driver reinforces bass and lower midrange energy within the cabin, with the flat mounting surface allowing low frequencies to propagate broadly through the interior space.
- Full-range speakers cover a wider frequency band than midbass drivers, typically from around 60 Hz up to 20 kHz, using a main cone combined with a dust cap or passive radiator arrangement to extend treble output.
- A full-range 6.5 inch driver mounted on the Nissan 200SX rear deck lid would reproduce mid and high frequencies from a position behind the primary listening area, which can affect perceived stereo imaging for front-seat occupants.
- The rear deck lid position places the speaker baffle above the trunk cavity, and in vehicles where the deck lid is not fully sealed from the trunk, the open air volume below can act as an acoustic load that influences bass extension and efficiency for 6.5 inch drivers.