Peugeot 2008 Rear Door Panel Speaker Size
The Peugeot 2008 rear door panel accommodates a 6.5 inch speaker size and 1 inch units, supporting both speaker configurations across the available model years. Compatible types for the audio system include midbass, full-range, and tweeter units. The specifications cover a range of years from 2013 to 2025.
| Year | Type | Size (inch) |
|---|---|---|
| 2025 | Midbass / Full-Range | 6.5 |
| 2025 | Tweeter | 1 |
| 2024 | Midbass / Full-Range | 6.5 |
| 2024 | Tweeter | 1 |
| 2023 | Midbass / Full-Range | 6.5 |
| 2023 | Tweeter | 1 |
| 2022 | Midbass / Full-Range | 6.5 |
| 2022 | Tweeter | 1 |
| 2021 | Midbass / Full-Range | 6.5 |
| 2021 | Tweeter | 1 |
| 2020 | Midbass / Full-Range | 6.5 |
| 2020 | Tweeter | 1 |
| 2019 | Midbass / Full-Range | 6.5 |
| 2018 | Midbass / Full-Range | 6.5 |
| 2017 | Midbass / Full-Range | 6.5 |
| 2016 | Midbass / Full-Range | 6.5 |
| 2015 | Midbass / Full-Range | 6.5 |
| 2014 | Midbass / Full-Range | 6.5 |
| 2013 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Tweeter | A small driver built for high frequencies, typically from about 2,000 Hz to 20,000 Hz. It adds treble detail and clarity and is usually mounted near ear level or aimed at the listener. |
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The rear door panel is a flush-mounted cavity location, meaning speakers are recessed into the interior door trim and face inward toward the cabin rather than being surface-mounted in open air.
- Door panel enclosures are acoustically shallow and semi-sealed, with the door cavity itself acting as a partial rear chamber for the speaker cone.
- The 6.5 inch diameter specified for the Peugeot 2008 rear door panel positions a driver large enough to move sufficient air volume for meaningful low-to-mid frequency reproduction, typically covering a range from approximately 60 Hz up to 5 kHz depending on cone and crossover design.
- In a rear door panel location, a 6.5 inch driver operating as a midbass unit handles frequencies in the lower midrange and upper bass bands, reinforcing body and warmth in rear-cabin listening positions.
- When a 6.5 inch driver operates as a full-range in the rear door panel, no external crossover is required, and the single cone handles the entire audible spectrum the enclosure physically permits.
- The 1 inch tweeter size specified for model years 2019 through 2025 in the Peugeot 2008 rear door panel is characteristic of a small-dome or soft-dome high-frequency driver, designed to reproduce frequencies typically above 2 kHz to 3 kHz where the 6.5 inch driver loses directional coherence.
- A 1 inch tweeter mounted in a rear door panel radiates high-frequency energy at a relatively wide dispersion angle at close range, which in a rear-door position directs treble energy toward rear seat occupants.
- The pairing of a 1 inch tweeter alongside a 6.5 inch midbass or full-range driver in the same door panel indicates a two-way speaker arrangement at the rear doors, where frequency division between the 2 units requires either passive crossover components or an active signal processor.
- The rear door panel location places speakers at a lower height relative to seated occupants, which influences the perceived soundstage and stereo imaging, particularly for high-frequency content where wavelength and ear height interact more sensitively.
- Door panel mounting subjects speakers to mechanical vibration from door operation, road noise transmission through the door skin, and potential moisture exposure from window seal proximity, all of which are relevant to driver material durability at this location.
- The 6.5 inch cutout dimension defines the maximum basket diameter the rear door panel aperture accommodates, meaning any compatible replacement driver must not exceed the mounting depth or outer frame diameter the panel cavity allows.