Peugeot 405 Front Kick Panel Speaker Size
The Peugeot 405 front kick panel accommodates a 5.25 inch speaker size across all listed model years. Midbass units are the compatible speaker type for the audio system in this location. The specifications cover a range of years from 1987 to 1991.
| Year | Type | Size (inch) |
|---|---|---|
| 1991 | Midbass | 5.25 |
| 1990 | Midbass | 5.25 |
| 1989 | Midbass | 5.25 |
| 1988 | Midbass | 5.25 |
| 1987 | Midbass | 5.25 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
Additional Notes
- The front kick panel location in the Peugeot 405 refers to the angled trim panels positioned at the base of the dashboard, near the driver's and passenger's feet, where the floor meets the firewall.
- Kick panel positions are typically confined enclosures with limited depth, which constrains the physical size of speakers that can be mounted flush without interference from surrounding structure or foot space.
- The 5.25 inch diameter specification across all listed model years of the Peugeot 405 front kick panel reflects a mid-range cone size that balances cone surface area with the spatial restrictions characteristic of kick panel cavities.
- A 5.25 inch driver occupies a mounting cutout diameter generally around 4.5 inches, requiring a moderate depth clearance behind the panel to accommodate the basket and magnet assembly without contacting the firewall or adjacent bodywork.
- The kick panel position places speakers at a low angle relative to the listening plane, which affects the directional projection of sound toward the occupants and influences how the speaker interacts with the floor and door structures acoustically.
- The Peugeot 405 front kick panel's midbass-only compatibility designation means the location is suited for speakers handling the lower-midrange and upper-bass frequency bands, generally spanning approximately 80 Hz to 500 Hz.
- Midbass drivers are cone-based transducers engineered to reproduce frequencies that carry the fundamental tones of vocals, lower string instruments, and the upper extension of bass content, without extending into high-frequency reproduction.
- A 5.25 inch cone area is sufficient to move the air volume required for midbass frequencies while remaining compact enough to fit within the constrained kick panel opening present in the Peugeot 405.
- The midbass type classification excludes full-range, coaxial, and tweeter configurations from the front kick panel of the Peugeot 405, indicating the location functions as a dedicated low-to-mid frequency source rather than a wide-spectrum point of sound reproduction.
- Because kick panels angle upward and inward toward the occupants, a 5.25 inch midbass driver installed in the Peugeot 405 front kick panel radiates toward the lower body of the passenger compartment, which influences the spatial distribution of the reproduced frequency range.