Pontiac Firebird Speaker Size

Speaker size, type, and location chart for Pontiac Firebird models from 1990 to 2002 production years.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Front Door Panel Speaker

YearsTypeSize (inch)
1990 - 2002Midbass / Full-Range6.5
1993Full-Range4x6

Rear Speaker

YearsTypeSize (inch)
2000 - 2002Midbass / Full-Range6.5

Rear Door Panel Speaker

YearsTypeSize (inch)
1990 - 1999Midbass / Full-Range6.5

Rear Deck Lid Speaker

YearsTypeSize (inch)
1993Full-Range6x9

Pontiac Firebird Speaker FAQ

What speakers should I prioritize replacing first in my Pontiac Firebird?

Replace front door speakers first. The 6.5-inch front doors handle most vocals and midrange frequencies that you'll notice immediately. Rear speakers can wait - they're mainly for fill and passengers. Front door upgrades in the Pontiac Firebird typically show the biggest improvement in sound clarity since that's where you sit. Component speakers work better than coaxials if your budget allows, but either will beat factory paper cones.

Can I install component speakers in all Pontiac Firebird door locations?

Yes, most Firebird door panels accept components. The 6.5-inch locations work well for separates - you might need to mount tweeters in the sail panels or dash corners though. Some 1993 models have 4x6 openings which... those are trickier for components. You'd probably want to modify the opening or stick with coaxials there. Rear 6.5-inch spots can take components too but the wiring gets more complex.

What's the difference between coaxial and triaxial speakers for my Firebird's rear deck?

Triaxials add a super tweeter on top of the regular tweeter and woofer. In theory they extend frequency response up to maybe 25kHz. Reality is... most people can't hear much above 18kHz anyway. The 6x9 rear deck location in 1993 Firebirds works fine with either type. Coaxials might actually sound cleaner since there's less interference between drivers. Triaxials can sound busy or harsh if the crossover points aren't well-designed.

How much power do I need for Pontiac Firebird speaker upgrades?

Factory head units push maybe 15-20 watts RMS. Most aftermarket speakers want 25-75 watts RMS to really open up. Something like 50 watts RMS per channel works well for the Firebird's cabin size. You don't need massive power - clean power matters more. The 6.5-inch speakers respond better to quality amplification than just turning up a weak head unit. Even 30 clean watts beats 100 watts of distorted power from an overdriven radio.

What speaker impedance should I use in my Firebird?

Stick with 4-ohm speakers. Most car audio systems expect 4-ohm loads and your amplifier or head unit will deliver proper power. 8-ohm speakers work but you'll get roughly half the wattage. 2-ohm speakers can overheat some head units if you're not using a separate amplifier. The Pontiac Firebird's electrical system handles 4-ohm loads fine across all speaker positions - front doors, rear doors, or deck lid.