Ram Dakota Speaker Size
Speaker size, type, and location chart for Ram Dakota models from 2011 to 2011 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2011 | Tweeter | 0.75 |
| 2011 | Midbass / Full-Range | 6.75 |
Rear Side Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2011 | Midbass / Full-Range | 6.75 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2011 | Midbass / Full-Range | 6.75 |
Ram Dakota Speaker FAQ
What speakers should I replace first in my Ram Dakota for the biggest sound improvement?
Replace the front door panel 6.75 inch speakers first. These handle most of your music's midrange and bass content, so upgrading them delivers the most noticeable difference. The front speakers get more power from your head unit typically. Look for coaxial speakers rated around 50-75 watts RMS with 4-ohm impedance. Component speakers work too if you want to keep the existing 0.75 inch tweeters separate. Rear speakers can wait - they mostly fill in ambient sound in the Ram Dakota cabin.
Can I install component speakers in all Ram Dakota door locations?
Yes, but the front doors already have dedicated tweeter locations at 0.75 inch. This makes component installation straightforward since you can mount the woofer in the 6.75 inch opening and use the existing tweeter spot. Rear doors don't have separate tweeter mounts, so you'd need to create custom mounting points or run coaxial speakers instead. Component systems usually sound better than coaxials because... well, the crossover separates frequencies more precisely. The Ram Dakota's door panels should accommodate most aftermarket component sets without major modifications.
Why does my Ram Dakota have different speaker types listed for the same size locations?
The factory likely used different speaker configurations depending on trim level or audio package. Some Ram Dakota models came with basic coaxial speakers, others had component setups, and higher trims might have had full-range drivers. All use 6.75 inch openings though, which gives you flexibility. Coaxials are easier to install - one speaker handles everything. Components separate tweeters and woofers for better sound staging. Full-range speakers try to cover the entire frequency spectrum but often compromise on both ends. Check what's actually installed in your truck before ordering replacements.
What's the difference between the front and rear 6.75 inch locations in a Ram Dakota?
Front door panels typically get more power and handle stereo imaging - these create the soundstage you hear. Rear door and side panel speakers mostly provide fill and ambiance. The rear side panel location might be slightly different mounting depth compared to door panels, so measure before buying speakers. Power distribution usually favors front speakers too, maybe 15-20 watts to the rears versus 25-30 watts front. This means your front 6.75 inch upgrades will sound more dramatic than rear ones. Some people skip rear speaker upgrades entirely and focus budget on quality front components instead.
Do I need to replace the 0.75 inch tweeters when upgrading Ram Dakota speakers?
Not necessarily. If you install coaxial speakers in the 6.75 inch openings, you can disconnect the separate tweeters since coaxials have built-in tweeters. But if you go with component speakers, you might want to upgrade the 0.75 inch tweeters too for better frequency matching. Stock tweeters usually handle around 5-20 kHz, while aftermarket ones might extend higher or lower. The existing tweeter wiring should work with most aftermarket units, though you might need different mounting hardware. Some people leave stock tweeters connected with new coaxials - creates interesting sound but isn't ideal for frequency response.