Saturn LS Speaker Size
Speaker size, type, and location chart for Saturn LS models from 2000 to 2000 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2000 | Midbass / Full-Range | 6.5 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2000 | Midbass / Full-Range | 6.5 |
Saturn LS Speaker FAQ
What speakers should I replace first in my Saturn LS for the biggest sound improvement?
Replace the front door panel speakers first. The 6.5-inch front speakers handle most of your music's critical frequencies and vocals. Your Saturn LS relies heavily on these for stereo imaging. Rear speakers mostly fill in ambient sound. Start with quality coaxial or component speakers rated around 50-75 watts RMS at 4 ohms. You'll notice the difference immediately in clarity and bass response. The rear 6.5-inch speakers can wait unless you frequently carry passengers who complain about sound quality.
Should I choose coaxial or component speakers for my Saturn LS front doors?
Component speakers give better sound separation since the tweeter mounts separately from the woofer. This creates more precise stereo imaging in your Saturn LS cabin. However, coaxial speakers are simpler to install and still provide significant improvement over factory units. If you're keeping the stock head unit, coaxials might be the better choice. They typically handle 20Hz-20kHz frequency range effectively. Component systems need more planning for tweeter placement and crossover mounting. Consider your installation skills and budget first.
Can I mix coaxial and component speakers in different locations of my Saturn LS?
Yes, but keep the front pair matched and rear pair matched. Many Saturn LS owners run components in front doors and coaxials in rear doors. This works well since front speakers handle primary listening duties. Make sure impedance matches across all speakers - typically 4 ohms. Avoid mixing 2-ohm and 8-ohm speakers as this creates uneven power distribution. The key is maintaining similar sensitivity ratings, usually around 87-92 dB. Different speaker types can actually complement each other when planned correctly.
What power handling should I look for in 6.5-inch Saturn LS replacement speakers?
Target 50-75 watts RMS for most aftermarket head units. Peak power ratings mean less than RMS - focus on continuous power handling. Your Saturn LS electrical system can typically support speakers up to 100 watts RMS per channel with a decent amplifier. Factory head units usually output 15-25 watts RMS, so even modest aftermarket speakers will seem dramatically louder. Higher sensitivity ratings (90+ dB) work better with factory power. Lower sensitivity speakers need amplification to reach their potential.
Do full-range speakers work well in Saturn LS rear door panels?
Full-range speakers can work adequately in rear positions. They cover broader frequency spectrum than basic coaxials, typically 35Hz-25kHz. Your Saturn LS rear doors don't need the same fidelity as fronts anyway. Full-range designs often include whizzer cones or additional drivers for extended highs. The main limitation is power handling - many full-range speakers max out around 40-50 watts RMS. This might be sufficient for rear fill duty. Consider room acoustics and whether rear passengers matter for your listening habits.