Subaru Crosstrek Speaker Size
Speaker size, type, and location chart for Subaru Crosstrek models from 2013 to 2025 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2013 - 2025 | Midbass / Full-Range | 6.5 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2013 - 2025 | Midbass / Full-Range | 6.5 |
Subaru Crosstrek Speaker FAQ
What speakers should I replace first in my Subaru Crosstrek to get the biggest sound improvement?
Start with the front door panel speakers. The front stage carries most of the musical information your ears focus on, so replacing the front 6.5 inch midbass/full-range drivers will likely deliver a more noticeable improvement than starting at the rear. The Subaru Crosstrek uses the same 6.5 inch size at all four positions, which makes budgeting straightforward, but front priority tends to hold true for most listening situations. Rear fill can come later.
What size replacement speakers fit the front door panel locations in the Subaru Crosstrek?
The front door panels in the Subaru Crosstrek accept 6.5 inch speakers. That said, actual mounting depth and diameter clearance can vary, so confirming fitment with a vehicle-specific adapter plate is a reasonable step before purchasing. Some 6.5 inch speakers carry a larger basket diameter than others, and tight door cavities sometimes create fitment surprises.
What power handling should I look for in replacement speakers for the Subaru Crosstrek?
For a stock head unit setup in the Subaru Crosstrek, speakers rated at around 15 to 30 watts RMS should handle factory power without stress. If you plan to add an external amplifier, targeting speakers rated at 50 to 75 watts RMS gives reasonable headroom. Peak wattage ratings printed on speaker packaging tend to be less useful than RMS figures when making comparisons. Impedance should match at 4 ohms for standard compatibility with the factory system.
Should I replace the Subaru Crosstrek rear door speakers with the same model as the front?
Matching speaker models front and rear is one approach, and it can produce a more consistent tonal character throughout the Subaru Crosstrek cabin. However, some configurations deliberately use a midbass-focused driver at the rear and a component or coaxial set at the front. The rear 6.5 inch positions in the Crosstrek handle fill and low-mid support, so a speaker with decent low-frequency extension down to around 60 to 80 Hz tends to work reasonably well there. Whether matching matters depends on how critical the rear stage is to your listening preference.
What speaker type works best in the Subaru Crosstrek door locations, coaxial or component?
Coaxial speakers are a more straightforward drop-in option for the Subaru Crosstrek 6.5 inch door positions. Component sets can offer improved imaging and separation, but they require mounting a separate tweeter somewhere in the door or A-pillar area, which involves additional work. The midbass/full-range designation at these locations suggests the factory design expects a single driver to cover a wide frequency range, roughly 80 Hz to 20,000 Hz or so. Component sets tend to handle that range with better clarity at the high end, though installation complexity goes up considerably.