Toyota Cressida Speaker Size

Speaker size, type, and location chart for Toyota Cressida models from 1979 to 1992 production years.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Rear Deck Lid Speaker

YearsTypeSize (inch)
1990 - 1992Midbass / Full-Range6.5
1979 - 1981Full-Range5x7

Dashboard Speaker

YearsTypeSize (inch)
1988 - 1992Midrange4

Rear Door Panel Speaker

YearsTypeSize (inch)
1988 - 1992Full-Range5x7

Front Door Panel Speaker

YearsTypeSize (inch)
1979 - 1981Midbass / Full-Range5.25

Toyota Cressida Speaker FAQ

What speakers should I replace first in my Toyota Cressida for the biggest sound improvement?

Start with the rear deck lid speakers - they handle most of your mid-bass and overall volume. The 6.5-inch position gives you the most upgrade potential, typically handling 50-100 watts RMS. Dashboard speakers are secondary since they're only 4-inch and limited to maybe 25 watts. Front door panels come next if you want better stereo imaging, but the rear deck does the heavy lifting for overall sound quality in the Toyota Cressida.

Can I install component speakers in all Toyota Cressida locations?

Most locations accept components, but it gets tricky. Rear deck lid spots work great for component woofers - you can mount tweeters separately or use the existing tweeter locations. Dashboard might be too cramped for proper component separation. The 5 x 7 positions typically need some modification since component speakers usually come in round configurations. You'd need mounting adapters or custom brackets. Coaxial speakers are often the more practical choice for Toyota Cressida installations.

Why does my Toyota Cressida have different speaker sizes in different years?

Toyota changed the interior design and acoustic requirements. Earlier models used 5 x 7 oval speakers in rear positions - these were common in the late 70s and early 80s. Later Toyota Cressida models switched to 6.5-inch round speakers, which generally offer better sound quality and more aftermarket options. The 5.25-inch front door speakers remained consistent in some years. Dashboard speakers stayed at 4-inch across most configurations since space was always limited there.

What's the difference between coaxial and component speakers for Toyota Cressida installation?

Coaxial speakers put the tweeter and woofer in one unit - simpler installation, fits most Toyota Cressida factory locations without modification. Component speakers separate the tweeter and woofer, giving better sound staging but requiring more work. You'll need to run additional wiring, find tweeter mounting points, possibly use crossovers. Components typically sound better if installed properly, but coaxials might be the smarter choice for rear deck or door panel locations where you can't optimize tweeter placement anyway.

Can I use full-range speakers instead of coaxial in my Toyota Cressida?

Full-range speakers work, but they're usually a step down from coaxials. They try to reproduce all frequencies with one driver - no separate tweeter for highs. This means less crisp detail in vocals and cymbals. The Toyota Cressida's interior acoustics aren't bad, so you'd probably notice the difference. Full-range might make sense for rear positions where you mainly want mid-bass support, but front locations benefit from the dedicated tweeter in coaxial designs. Unless budget is really tight, coaxials are worth the extra cost.