Toyota Paseo Speaker Size
Speaker size, type, and location chart for Toyota Paseo models from 1992 to 1998 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1992 - 1998 | Midrange | 4 |
| 1992 - 1997 | Midbass / Full-Range | 6.5 |
Rear Side Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1997 - 1998 | Midbass / Full-Range | 6.5 |
Dashboard Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1998 | Full-Range | 5.25 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1996 - 1998 | Midbass / Full-Range | 6.5 |
Rear Deck Lid Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1992 - 1997 | Midbass / Full-Range | 6.5 |
Toyota Paseo Speaker FAQ
What speakers should I replace first in my Toyota Paseo?
Replace the front door speakers first. These handle most of your music's midrange and vocal frequencies. The 6.5-inch front door speakers (1992-1997) or 4-inch speakers (1992-1998) carry the bulk of your audio load. Rear speakers mostly fill in ambient sound. Focus your budget on quality front components - maybe 60-80 watts RMS with 4-ohm impedance. The difference will be immediately noticeable since you're sitting closest to the front stage.
Can I install component speakers in all Toyota Paseo locations?
Most locations accept both coaxial and component speakers. Component systems work best in front doors where you can properly separate tweeters and woofers. The 6.5-inch front door spots are ideal for components. Rear locations like the deck lid or side panels... coaxials might actually be more practical there. Less wiring, easier installation. Component systems need crossovers and separate tweeter mounting. Not every Toyota Paseo owner wants that complexity in rear positions.
Why does my 1998 Toyota Paseo have dashboard speakers?
The 1998 model added 5.25-inch dashboard speakers to improve front soundstage imaging. These speakers handle upper midrange frequencies around 500-4000 Hz. They bridge the gap between door woofers and tweeters in factory systems. Dashboard mounting puts sound closer to ear level. Better stereo separation than door-only setups. Though some people find dashboard speakers create weird reflections off the windshield. Depends on your seating position and the speaker's frequency response curve.
What's the difference between Toyota Paseo rear deck and side panel speakers?
Rear deck speakers (1992-1997) fire upward from behind the rear seats. Side panel speakers (1997-1998) mount vertically on the rear quarter panels. Both use 6.5-inch drivers but... deck speakers typically emphasize bass reflection off the rear window. Side panels aim sound more directly at passengers. The midrange designation on side panel speakers suggests they're voiced differently. Probably rolled off below 80 Hz and above 8 kHz. Check your Toyota Paseo's specific mounting depth before buying replacements.
Should I upgrade Toyota Paseo rear door speakers separately?
The 1996-1998 Toyota Paseo rear door speakers are listed as full-range, meaning they handle complete frequency spectrum. Unlike dedicated midrange drivers elsewhere. These 6.5-inch speakers probably run 40-50 watts RMS at 4 ohms. If your front speakers sound good, rear doors become less critical. Some people disconnect rear speakers entirely for better front imaging. But if you carry rear passengers often... upgraded rear doors do help fill the cabin. Match impedance with your front speakers to avoid amplifier issues.