Toyota Supra Speaker Size

Rear Deck Lid Speaker

Front Door Panel Speaker

Cargo Area Speaker

Dashboard Speaker

Rear Door Panel Speaker

Rear Side Panel Speaker

Toyota Supra Speaker FAQ

What speakers should I upgrade first in my Toyota Supra?

Start with the front door panel speakers. These 4-inch positions handle most of your midrange frequencies and vocals. They're typically easier to access than rear deck installations. The front speakers create your primary soundstage - everything else builds around them. Rear positions can wait until later.

Can I install 6.5-inch component speakers in the rear deck lid?

Yes, but it depends on your specific setup. The rear deck lid accommodated both coaxial and component types in 6.5-inch size. Component systems separate the tweeter from the woofer - you'll need mounting space for the crossover network. Check if your Toyota Supra has existing tweeter locations before committing to components. Coaxials might be simpler if space is tight.

Why does my Toyota Supra have different rear speaker sizes?

The rear configuration changed over the production run. Earlier models used 4-inch speakers in the rear deck lid. Later versions moved to 6.5-inch rear deck speakers with additional 6x8 cargo area speakers. Some years had rear side panel speakers too. This created more bass response and overall output. The 6x8 cargo speakers typically handle lower frequencies while deck speakers focus on mids.

What's the difference between the dashboard and door panel speakers?

Both locations use 4-inch speakers, but they serve different purposes. Dashboard speakers sit higher and wider - they help create stereo imaging and handle upper midrange frequencies. Door panel speakers are your primary drivers for vocals and most musical content. The dashboard position might have limited depth for mounting, so check clearance before buying aftermarket speakers. Door panels usually offer more installation flexibility.

Should I use full-range or coaxial speakers in the cargo area?

The 6x8 cargo area works well with full-range speakers. This location is behind the listening position, so it primarily adds bass reinforcement and ambient sound. Coaxials would work too, but the tweeter positioning might not contribute much to the soundstage. Full-range speakers can handle 50-80 watts RMS effectively in this position. Consider the cargo area as bass support rather than primary sound reproduction.

Can I mix coaxial and component speakers in my Toyota Supra?

You can, but timing becomes tricky. Components typically have crossover networks that change phase relationships. If you mix them with coaxials, some frequencies might cancel or reinforce unexpectedly. The rear deck lid supports both types - you could run components there with coaxials in other positions. Just avoid mixing types in the same frequency range. Front doors and rear deck handle similar frequencies, so keep those consistent.

What power handling should I look for in 4-inch Toyota Supra speakers?

Most 4-inch aftermarket speakers handle 30-60 watts RMS. The front door panels have decent mounting depth, so you're not severely limited by space. Look for speakers rated around 4-8 ohms impedance to match your head unit. Higher power handling doesn't always mean better sound - focus on frequency response and build quality. The dashboard location might limit you to smaller magnets, which affects power handling.