Toyota Yaris Speaker Size
Speaker size, type, and location chart for Toyota Yaris models from 2007 to 2018 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
A-Pillar Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2012 - 2018 | Tweeter | 1 |
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2007 - 2018 | Midbass / Full-Range | 6.5 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2009 - 2018 | Midbass / Full-Range | 6.5 |
Rear Side Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2007 - 2011 | Midbass / Full-Range | 5.25 |
Rear Deck Lid Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2007 - 2011 | Full-Range | 6x9 |
Toyota Yaris Speaker FAQ
Should I replace the front or rear speakers first in my Toyota Yaris?
Replace the front door panel speakers first. Your Toyota Yaris uses 6.5 inch speakers in the front doors, and these handle most of the mid-range frequencies you actually hear while driving. The front speakers typically get 60-70% of the audio signal from your head unit. Rear speakers mostly fill in ambient sound. Start with coaxial speakers rated around 60-75 watts RMS with 4-ohm impedance - they'll drop right into the factory mounting points without modifications.
Can I install component speakers in all Toyota Yaris door locations?
Yes, both front and rear door panels accept component speakers. The front 6.5 inch location works well with component systems since you might already have tweeter mounting in the A-pillar on newer models. Rear doors also take 6.5 inch components, though some configurations show rear side panels with 5.25 inch speakers instead. Component speakers separate the tweeter from the woofer, giving you better imaging. Just verify your specific Toyota Yaris layout - some variations exist between model updates.
What's the difference between installing coaxial vs component speakers in my Toyota Yaris?
Coaxial speakers put everything in one unit - easier installation, one mounting point per speaker. Component speakers split the tweeter and woofer into separate pieces. Your Toyota Yaris front doors can handle either type, but components need crossover wiring and tweeter mounting. If your Yaris has A-pillar tweeters already, components make sense. Otherwise coaxials work fine and cost less. Power handling stays similar - look for 50-80 watts RMS regardless of type. Frequency response matters more than the format.
Are 6x9 speakers in the rear deck worth upgrading on a Toyota Yaris?
The rear deck 6x9 speakers add bass extension but aren't critical for sound quality. These handle lower frequencies better than the 6.5 inch door speakers due to size. Triaxial options include a dedicated tweeter and mid-range driver. However, rear deck speakers often get muffled by cargo or rear seats. Focus your budget on front speakers first - the 6x9s can wait. When you do upgrade them, look for speakers with good low-end response around 45-60 Hz since they'll be your main bass source without a subwoofer.
How much power do Toyota Yaris factory speakers handle?
Factory Toyota Yaris speakers typically handle 15-25 watts RMS. Pretty weak. Aftermarket replacements should be rated 50-75 watts RMS for noticeable improvement without overwhelming your head unit. Most factory head units output 15-22 watts per channel, so don't go crazy with 100+ watt speakers unless you're adding an amplifier. The 4-ohm impedance stays standard across all locations. Higher power handling gives you cleaner sound at volume, not necessarily louder sound. Your Toyota Yaris electrical system can support moderate upgrades without issues.