Chevrolet Volt Rear Side Panel Speaker Size
The Chevrolet Volt rear side panel accommodates an 8 inch speaker size. Woofer units are the compatible type for this location. These specifications cover 2011 through 2018.
| Year | Type | Size (inch) |
|---|---|---|
| 2018 | Woofer | 8 |
| 2017 | Woofer | 8 |
| 2016 | Woofer | 8 |
| 2015 | Woofer | 8 |
| 2014 | Woofer | 8 |
| 2013 | Woofer | 8 |
| 2012 | Woofer | 8 |
| 2011 | Woofer | 8 |
Speaker Types
| Type | Description |
|---|---|
| Woofer | A larger driver for low frequencies, typically from about 40 Hz up to 1,000 Hz. It delivers most of the bass and lower midrange in a door or panel speaker system. |
Additional Notes
- The rear side panel location in the Chevrolet Volt accepts an 8-inch speaker across all listed model years.
- Rear side panel positions are typically recessed into the interior trim panels along the rear cabin walls, placing the speaker cone facing inward toward the passenger compartment rather than upward or downward.
- An 8-inch driver has a relatively large cone surface area, which allows greater air displacement and stronger reproduction of low-frequency content compared to smaller diameter speakers in other vehicle locations.
- The woofer type is the sole compatible speaker type for the Chevrolet Volt rear side panel, indicating the location is designated exclusively for low-frequency reproduction rather than full-range or high-frequency duties.
- Woofers are designed to handle the lower portion of the audible frequency spectrum, generally covering frequencies from approximately 20 Hz up to around 500 Hz to 2,000 Hz depending on crossover configuration.
- At 8 inches, the driver diameter supports the mechanical excursion and cone mass requirements that woofer-class reproduction demands, particularly for extended low-frequency output at higher SPL levels.
- The rear side panel placement positions the woofer behind the rear passengers, which means low-frequency energy radiates forward through the cabin length before reaching front seat occupants.
- Because low frequencies are largely omnidirectional by nature, the rear side panel mounting position of a woofer does not impose the same directional constraints that a tweeter or midrange placement would require.
- The physical depth of a rear side panel cavity in a vehicle like the Chevrolet Volt must accommodate the mounting depth of an 8-inch woofer, which typically requires more clearance than smaller-diameter drivers due to the longer voice coil travel and basket depth associated with woofer designs.
- The baffle area provided by a rear side panel must be sufficient to support an 8-inch cutout diameter plus the surrounding mounting flange, which is a larger spatial requirement than the front door or dash locations found in many vehicles.