Chrysler 300M Speaker Size

Dashboard Speaker

Front Door Panel Speaker

Rear Deck Lid Speaker

Rear Speaker

Chrysler 300M Speaker FAQ

Which speakers should I replace first in my Chrysler 300M for the biggest sound improvement?

Replace the front door 6.5 inch speakers first. These handle most of your music's midrange frequencies and vocals - you'll notice the biggest difference here. The front doors in the Chrysler 300M typically get 15-25 watts RMS from the factory head unit, so look for speakers rated around 4 ohms impedance. Component speakers work best if you want crisp highs, but quality coaxial speakers might be easier to install. The dashboard 3.5 inch speakers... they're more for fill but won't give you much bass response anyway.

Can I install component speakers in all locations of my Chrysler 300M?

Front doors definitely support component speakers - the 6.5 inch location works well for separating woofers and tweeters. Rear locations are trickier though. The 6 x 9 inch rear deck speakers could handle components, but you'd need custom tweeter mounting since the factory setup expects coaxial or triaxial designs. Dashboard spots are basically limited to coaxial or full-range types due to space constraints. Component systems really shine in the front doors where you can properly position the tweeters for better imaging in your Chrysler 300M.

What's the difference between coaxial and triaxial speakers for the rear deck of a Chrysler 300M?

Triaxial speakers add a third element - usually a super tweeter for extended high frequencies above 10kHz. The rear 6 x 9 inch deck location in the Chrysler 300M can accommodate both types. Coaxial speakers might give you better overall balance since they focus on midrange and standard tweeter response. Triaxial can sound brighter but... sometimes too bright depending on your music preferences. Power handling is similar - expect around 20-40 watts RMS for either type. The extra tweeter in triaxial designs doesn't always mean better sound quality.

Why does my Chrysler 300M have such small dashboard speakers?

The 3.5 inch dashboard speakers mainly fill in upper midrange frequencies around 2-8kHz. They're not designed for bass - that's handled by the door and rear speakers. These little speakers probably see 5-10 watts from your head unit and work at 4 ohm impedance. Full-range types work better here than trying to squeeze coaxials with tiny woofers. Think of them as supporting actors rather than main performers in your Chrysler 300M's sound system. Replacing them helps with clarity but won't transform your audio experience.

Can I mix different speaker types in my Chrysler 300M without problems?

Generally yes, but keep impedance consistent at 4 ohms across all locations. You could run component speakers in front doors and coaxial in rear positions - many people do this in their Chrysler 300M. The key is matching sensitivity ratings so one set doesn't overpower others. If your front components are 88dB sensitive, try to get rear speakers within 2-3dB of that range. Different brands usually work fine together as long as the electrical specs align with your head unit's output capabilities.