Chrysler Concorde Speaker Size
Speaker size, type, and location chart for Chrysler Concorde models from 1993 to 2004 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1998 - 2004 | Midbass / Full-Range | 6.5 |
| 1993 - 1997 | Midbass / Full-Range | 5.25 |
Dashboard Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1993 - 2004 | Full-Range | 3.5 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 2002 - 2004 | Midbass / Full-Range | 5.25 |
Rear Deck Lid Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1993 - 2004 | Full-Range | 6x9 |
Chrysler Concorde Speaker FAQ
Which speakers should I replace first in my Chrysler Concorde for the biggest sound improvement?
Replace the front door speakers first - they handle most vocals and midrange frequencies. The 6.5 inch front doors (1998-2004 models) or 5.25 inch fronts (1993-1997) will give you the most noticeable upgrade. These locations typically receive 15-25 watts RMS from your factory system. Component speakers work best here since they separate tweeter and woofer functions, though quality coaxials around 50-75 watts RMS handling will also improve things significantly. The dashboard 3.5 inch speakers barely affect overall sound quality.
Can I install component speakers in all Chrysler Concorde door locations?
Most door positions support component speakers, but mounting varies. Front doors usually have tweeter mounting points in the sail panels or door tops. Rear doors in 2002-2004 Concorde models might need custom tweeter installation since factory locations weren't always designed for separates. The 5.25 inch rear components typically need 4-ohm impedance to match factory wiring. You'll probably want to verify tweeter placement before buying - some positions require angle adjustments or small brackets.
What's the difference between coaxial and triaxial speakers for the Chrysler Concorde rear deck?
Triaxial speakers add a third driver - usually a small tweeter or super-tweeter for higher frequencies above 10kHz. The 6x9 inch rear deck position works well with either type since it's mainly for fill and bass support. Coaxials typically sound more focused with better midrange clarity around 500-3000Hz. Triaxials might give slightly more "spacious" sound but can sometimes feel harsh if the additional tweeter isn't properly integrated. Power handling ranges from 40-100 watts RMS for quality aftermarket options in this Concorde location.
Do I need to replace the dashboard speakers in my Chrysler Concorde?
Dashboard 3.5 inch speakers mainly handle high frequencies and vocal presence. They're not critical for bass or overall volume but they do affect stereo imaging. If your current dash speakers are blown or distorted, replacement helps with clarity above 2000Hz. Most aftermarket 3.5 inch options handle 20-40 watts RMS and use 4-ohm impedance. However, if you're upgrading front door speakers to quality components with good tweeters, the dashboard improvement becomes less noticeable. Consider them a secondary priority unless they're obviously damaged.
What power requirements should I consider for Chrysler Concorde speaker upgrades?
Factory systems typically output 12-20 watts RMS per channel. Aftermarket speakers should handle at least 50 watts RMS to allow for amplifier upgrades later. The 6x9 inch rear deck speakers can usually handle more power - maybe 75-120 watts RMS since they need to move more air for bass response. Front door speakers benefit from 50-80 watts RMS handling. Keep impedance at 4 ohms to match factory wiring unless you're planning complete system rewiring. Higher power handling doesn't necessarily mean better sound quality though.