Land Rover Range Rover Evoque Front Door Panel Speaker Size
The Land Rover Range Rover Evoque front door panel accommodates a 6.5 inch speaker size across all listed model years. Compatible speaker types for the front door panel audio system include midbass and full-range replacement units. These specifications cover the range of 2012 to 2018.
| Year | Type | Size (inch) |
|---|---|---|
| 2018 | Midbass / Full-Range | 6.5 |
| 2017 | Midbass / Full-Range | 6.5 |
| 2016 | Midbass / Full-Range | 6.5 |
| 2015 | Midbass / Full-Range | 6.5 |
| 2014 | Midbass / Full-Range | 6.5 |
| 2013 | Midbass / Full-Range | 6.5 |
| 2012 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The front door panel location in the Land Rover Range Rover Evoque positions speakers within the lower portion of the door, mounted against the interior door skin, which places the drivers at roughly seat-level height relative to occupants.
- Door panel installations typically involve a baffle formed by the door's inner cavity, which can act as an enclosure and influence the low-frequency output of any speaker mounted there.
- A 6.5 inch driver carries a cone surface area large enough to move sufficient air for meaningful bass reproduction, making the front door panel a mechanically suitable location for low-to-mid frequency reinforcement.
- The 6.5 inch diameter in a door-mounted position allows the driver to reach into the upper bass and lower midrange frequencies, typically covering a range from approximately 60 Hz to 5 kHz depending on cone material and crossover configuration.
- Door panel mounting introduces potential acoustic complications including road vibration transmitted through the door structure, rattles from loose door hardware, and standing wave interference within the door cavity itself.
- A midbass driver is designed to handle low and mid frequencies, generally crossing over to a separate tweeter for high-frequency content, which suits a door panel location where the enclosure favors bass extension over treble clarity.
- In the Land Rover Range Rover Evoque front door panel, a 6.5 inch midbass driver would operate in a frequency region where directional dispersion is still relatively wide, supporting even sound distribution across the cabin at those wavelengths.
- A full-range driver is designed to reproduce low, mid, and high frequencies from a single cone, allowing front door operation without requiring a dedicated tweeter in a separate location.
- When a full-range driver operates in a door panel enclosure, the high-frequency response can be affected by the angle and proximity of the cone to the listening position, since higher frequencies become more directional as wavelengths shorten.
- The front door panel location places the speaker firing across the cabin floor or toward passenger foot-wells at typical door-mounted angles, which can affect the directness of midrange and high-frequency energy reaching seated occupants.