Land Rover Range Rover Evoque Rear Door Panel Speaker Size
The Land Rover Range Rover Evoque rear door panel accommodates a 6.5 inch speaker size across all listed model years. Compatible speaker types for the location include midbass and full-range units. These specifications cover the 2012 to 2015 model range.
| Year | Type | Size (inch) |
|---|---|---|
| 2015 | Midbass / Full-Range | 6.5 |
| 2014 | Midbass / Full-Range | 6.5 |
| 2013 | Midbass / Full-Range | 6.5 |
| 2012 | Midbass / Full-Range | 6.5 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The rear door panel location in the Land Rover Range Rover Evoque positions speakers within the lower door cavity, placing the driver at seat level and directing sound upward and inward toward the cabin occupants.
- Door panel installations are subject to mechanical constraints including limited depth clearance behind the mounting surface and potential interference from window regulator mechanisms and internal door hardware.
- A 6.5-inch driver in a rear door panel occupies a mounting cutout that balances cone surface area against the spatial limits of a mid-size door cavity, allowing meaningful low-midrange excursion without requiring the structural accommodations demanded by larger formats.
- The 6.5-inch diameter provides a cone area sufficient to move enough air for effective bass and midrange reproduction in an enclosed door cavity, where the door panel itself acts as a baffle influencing the speaker's low-frequency loading.
- Midbass drivers are designed to cover the lower-midrange and upper-bass frequency band, typically from approximately 80 Hz to 500 Hz, handling the foundational body of instruments and vocals without extending into treble frequencies.
- In a rear door panel position, a midbass driver reinforces low-frequency energy in the rear of the cabin, complementing a front-stage configuration by adding warmth and weight to the overall soundfield from behind the seating position.
- Full-range drivers are designed to reproduce a wider frequency spectrum from bass through treble within a single cone, making them operable without a dedicated crossover network in installations where signal routing simplicity is a factor.
- When a full-range driver is mounted in a rear door panel, the physical distance between the rear and front listening positions introduces time-alignment considerations, as sound from the rear arrives at the listener's ears with a delay relative to front-mounted sources.
- The Land Rover Range Rover Evoque rear door panel accepts a 6.5-inch speaker, meaning aftermarket replacements must conform to the factory cutout diameter and bolt pattern to seat correctly within the door skin without additional fabrication.
- Door panel speaker locations are acoustically coupled to the internal door volume, and the air space behind the cone influences the speaker's resonant frequency, with a sealed or partially sealed door cavity raising the effective resonant point compared to free-air operation.