Porsche 944 Speaker Size
Speaker size, type, and location chart for Porsche 944 models from 1983 to 1991 production years.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
Front Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1983 - 1991 | Full-Range | 4x6 |
Rear Door Panel Speaker
| Years | Type | Size (inch) |
|---|---|---|
| 1983 - 1991 | Full-Range | 4x6 |
Porsche 944 Speaker FAQ
What speakers should I replace first in my Porsche 944?
Replace the front door panel speakers first. These 4 x 6 inch units handle most of your music's critical mid-range frequencies and vocals. The front location gives you better stereo imaging since you're sitting closer to them. Rear speakers mainly fill in ambient sound, so they're less critical for overall sound quality. Start with quality coaxial speakers rated around 50-75 watts RMS with 4-ohm impedance for the front doors.
Should I choose coaxial or component speakers for my Porsche 944?
Coaxial speakers work better for most 944 installations. The factory 4 x 6 inch openings in both front and rear door panels accommodate coaxials without major modifications. Component systems require separate tweeter mounting locations, which might not exist in your door panels. Coaxials integrate the tweeter into the main driver, simplifying installation. Look for coaxials with frequency response around 50Hz-20kHz and sensitivity ratings of 88-92 dB for good performance with factory head units.
Can I install plate speakers in my Porsche 944 front doors?
Yes, plate speakers are actually an option for the front door panels. These mount differently than standard speakers - they attach to a mounting plate rather than dropping into a speaker basket. Plate speakers often provide better bass response in shallow mounting depths. The 4 x 6 inch size works with the factory openings, though you'll need to verify mounting depth clearance. Consider plate speakers if your door panel space is limited or if you want improved low-frequency extension.
What power handling should I look for in 944 replacement speakers?
Target speakers with 40-60 watts RMS power handling for the 4 x 6 inch positions. Most factory Porsche 944 head units output around 15-25 watts per channel, so moderate power handling prevents overpowering. If you've added an aftermarket amplifier, you might consider speakers rated up to 75-100 watts RMS. Higher power handling typically means better dynamic range and less distortion at moderate volumes. The impedance should match factory specs - usually 4 ohms for proper load matching.
Do rear door speakers matter much in a Porsche 944?
Rear speakers contribute less to sound quality than front speakers in the 944's cabin layout. They primarily provide ambient fill and rear passenger coverage. The 4 x 6 inch rear door panel speakers should complement your front speakers rather than compete with them. Set rear speaker levels about 10-20% lower than fronts for proper staging. You could even skip rear speaker upgrades initially and focus budget on quality front speakers and possibly a small subwoofer for better overall improvement.