The Chrysler Cirrus dashboard accommodates a 3.5 inch speaker size. Full-range units represent the compatible audio type for the system. These specifications apply to the 2000 model year.
A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems.
Additional Notes
The dashboard location in the Chrysler Cirrus positions speakers within the instrument panel, a shallow and acoustically reflective enclosure that constrains both depth clearance and baffle area.
Dashboard installations typically involve limited mounting depth, which affects the excursion capability and low-frequency output of any driver installed in the position.
The 3.5-inch driver size in the Chrysler Cirrus dashboard occupies a small surface area, making the position suited to reproducing upper midrange and high-frequency content rather than extended bass frequencies.
A 3.5-inch cone has a relatively short pistonic travel range, which naturally rolls off low-frequency output below approximately 150-200 Hz in typical installations.
The dashboard location places speakers near the windshield and forward cabin surfaces, which can create early reflections that influence the perceived stereo imaging and high-frequency dispersion of the driver.
Full-range drivers are designed to reproduce as wide a portion of the audible frequency spectrum as a single driver can manage, typically spanning from the upper bass or lower midrange through the high treble region.
A full-range type at 3.5 inches in the Chrysler Cirrus dashboard is responsible for covering midrange vocals, presence frequencies, and high-frequency content from the front soundstage position.
The dashboard mounting position in this vehicle orients the speaker cone upward or at an angle toward the occupants, which affects the directional projection of higher frequencies where wavelengths are shorter than the driver's diameter.
Full-range drivers in compact sizes like 3.5 inches do not include a passive crossover network, meaning the driver receives the full signal without frequency division from the speaker itself.