Chrysler Concorde Rear Door Panel Speaker Size
The Chrysler Concorde rear door panel accommodates a 5.25 inch speaker size across all listed model years. Compatible types for the location include midbass and full-range audio system units. These specifications cover the 2002 to 2004 range of model years.
| Year | Type | Size (inch) |
|---|---|---|
| 2004 | Midbass / Full-Range | 5.25 |
| 2003 | Midbass / Full-Range | 5.25 |
| 2002 | Midbass / Full-Range | 5.25 |
Speaker Types
| Type | Description |
|---|---|
| Midbass | A driver tuned for upper bass and lower midrange, roughly from 80 Hz to 500 Hz. It has longer cone travel than a full-range unit, which supports stronger bass in doors and panels. |
| Full-Range | A single driver that reproduces bass through treble without a separate crossover network. It is the simplest replacement option and is common in factory audio systems. |
Additional Notes
- The rear door panel location in the Chrysler Concorde positions speakers within the lower portion of the door cavity, where the mounting surface is typically angled toward the cabin floor rather than directly facing the listener.
- A 5.25-inch driver occupies a mid-sized cone diameter, producing a balance between low-frequency extension and upper-midrange reproduction that suits a door panel environment where bass reinforcement and vocal clarity are both relevant.
- The rear door panel placement means the speaker fires into the rear passenger footwell area at an oblique angle, which affects the directional dispersion of higher frequencies reaching rear seat occupants.
- A 5.25-inch speaker in a door panel cavity is subject to the acoustic loading effect of the door's internal volume, which can reinforce low-frequency output depending on how sealed or ported the internal cavity is.
- The midbass type is a driver optimized for the frequency range roughly between 80 Hz and 500 Hz, covering the lower midrange and upper bass frequencies with a cone and motor structure tuned for controlled excursion rather than extended high-frequency output.
- A midbass driver in the rear door panel of the Chrysler Concorde would operate within the lower portion of the audible spectrum, where door panel placement provides natural acoustic coupling with the door cavity volume.
- The full-range type is a driver designed to reproduce frequencies across a broad spectrum, typically from around 80 Hz up to 20 kHz, often using a cone with a dust cap or whizzer cone to extend treble response.
- A full-range driver installed in the Chrysler Concorde rear door panel would handle the entire audible spectrum without requiring a dedicated crossover, making the door panel the sole source of rear channel audio across low, mid, and high frequencies at that position.
- The rear door panel location places the speaker at ear level for rear seat passengers when seated, which increases the directional perception of midrange and treble frequencies produced by a full-range driver type.
- The 5.25-inch mounting cutout dimension determines the minimum baffle opening required in the rear door panel, and the speaker's overall diameter and depth must both fit within the door's internal clearance to avoid contact with window mechanisms or the outer door skin.